FEATURES:

•  Wide infeed opening 230 x 380m (9”x15”), excellent for processing foliage, brushy and forked branches

•  Vertical anvil Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by stones and grit.

•  Hydraulic pump Directly connected to the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material. Infinitely variable speed.

•  Clutch Manual clutch system for no load starting of the engine. Engine is pivoted for engagement. Simple and reliable.

•  Outlet 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.

•  Jockey wheel Large solid wheel, height adjustable.

•  Light System LED tail, brake and license plate lights, suitable for 12 or 24 volt system.

•  Feed roller Pivot type, operates with less friction, moves forward and up to within 90mm of knives.

•  Feed control bar Pull to feed, push for reverse. Speed is infinitely variable.

•  Feed table Folds away and is locked when transporting the machine.

•  Auto sensor feed Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically, eliminating manual reversing of feedroller if a blockage occurs. Click here for a photo.

•  Finish Durable hyperloc powdercoated finish (Hansa green or optional colour of your choice).

•  Warranty 12 month warranty (conditions apply)

The powerful hydraulic feed system makes it easy to process any material. Its wide feed opening (15”) means bushy, twisted branches with forks are pulled into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic. The draft action of the rotor will blow the chips into any size truck or stockpile on the ground. With the 360° rotating outlet chute the discharge direction can be changed within seconds. Easy maneuverability is a feature of this machine, an important factor in the arboricultural industry

Click here to watch a short video of the C60 Brush Chipper.

This website was last updated in July 2010.

© All images and graphics on this website belong to Hansa Products ® and may not be reproduced without their express permission.

Website best viewed on 1024 x 768 pixel screen.